Body for 204002: Fit Guide and Replacement Tips
By Carrera； Der Spezialist | Published: 2026-10-26
Category: How-to Guides
Learn how to replace the body on a Carrera 204002 RC car. This guide covers fit checks, removal steps, and installation tips for a successful swap.
Quick answer
Swap the body on your Carrera 204002 by first removing the body clips, lifting off the old shell, then aligning the new body for 204002 over the chassis and securing it with the clips.
Before You Start: Check Body Compatibility
The body for 204002 (SKU 370600043) is a direct replacement designed specifically for the Carrera 204002 model. Using another shell may require modification or not fit at all.
If your 204002 has aftermarket upgrades (larger tires, shocks or a roll cage), test-fit the body before securing it—those modifications can create clearance issues.
Tools You May Need
A small flathead screwdriver or body clip removal tool helps pop the retaining clips without scratching the paint. A pair of tweezers can retrieve dropped clips inside deep body recesses.
You won't need glue or tape unless the stock mounting posts are damaged. The original clips and posts are designed to hold the body securely without adhesive.
How to Replace the Body on a Carrera 204002
- Remove the Old Body: Using your tool or fingers, carefully push the center of each body clip to release it from the post, then lift the clips off. Pull the shell upward from the chassis. Place the old body aside. Common mistake: forcing a stuck clip can snap the post. Wiggle gently if it resists.
- Prepare the New Body: Inspect the body for 204002 for any protective film on the windows. Remove it. Check that the pre-cut mounting holes are clean and free of plastic flashing from the mold. Empty flashing left in the holes makes the clips hard to seat. Use a small file or drill bit turned by hand to clear it.
- Position and Secure the Body: Set the new body onto the chassis, aligning the holes with the mounting posts. Press down gently. Reinstall the body clips by pushing them onto each post until they click into place. Double-check that the body sits flat and that no wires or components are pinched under it before pressing the clips home.
The Replacement Part
- body for 204002: This Carrera body part is listed for use with item 204002 and is identified by SKU code 370600043 in the Standard option. Using the designated part ensures the mounting holes align with the stock posts, saving you from drilling or modifying the shell.
body for 204002
