How to Install 2 Rear Shocks on RC Cars

Quick Answer

To install rear shocks on your RC car, remove the old shocks, mount the new ones in the correct orientation, and ensure they are securely fastened without over-tightening. This guide walks you through each step.

Step-by-Step Installation Guide

1. Prepare the RC car: Place the RC car on a flat, stable surface. Remove the rear wheels or body if needed to access the shock mounts. Ensure the car is powered off and the battery disconnected. Check that you have the correct replacement shocks for your model before starting.
2. Remove the old rear shocks: Using a small screwdriver or wrench, carefully remove the screws or clips securing the top and bottom of each old shock. Gently pull the shock away from the mounts. Keep the old hardware; it may be reusable if it's not damaged.
3. Install the new rear shocks: Position the new shock so the spring is on the correct side (usually facing outward). Attach the top mount first, then the bottom, ensuring the shock moves freely without binding. Tighten screws snugly but avoid over-tightening, which can strip threads or damage the shock eyelets. After installation, compress and release the suspension to confirm smooth movement and proper rebound.

Product Facts

• 2 rear shocks: This Carrera item is a set of 2 rear shocks, listed under SKU 370510001, offered as a spare part for RC vehicles. Having a matching set ensures balanced rear suspension and simplifies installation, as both shocks are identical and ready to mount.